Who is this for ?
The training course would be of interest to anyone involved in the construction industry and of particular use to those involved in the specification and installation, maintenance and inspection of passive fire protection including but not limited to: Risk Assessors, Fire Officers, Architects, Designers, Building Control, Installers, Site Managers and Supervisors.
Previous requirements ?
Module 1: The IFC Core Module (Passive Fire Protection)
The morning’s ‘discussion led’ Core Module is divided into three parts:
Beginning with an introduction and overview to the International Fire Consultants Group, the module examines the question of ‘Why are you here?’ and the reasons why the installation of fire systems should be undertaken correctly. We examine the consequences of when installation is not carried out competently and correctly; supplemented with real world examples of actual fires.
We then review and discuss a range of relevant documentation that is available i.e the regulation guidance in the UK and the associated Approved Documents to the Building Regulations. This will cover the Regulatory Reform (Fire Safety) Order (RRO) and the Risk Assessment process.
After looking at and considering the importance of third party certification for products and installers and CE marking, we introduce delegates to the premise of passive and active fire protection providing brief details about active fire protection and smoke control.
c: Fire & Fire Testing
The third session of the morning starts with asking ‘What is Fire?’ and explains some of the more important terminology and key causes of building fires. Fire tests are also examined with respect to large scale ‘Fire Resistance’ tests and ‘Reaction-to-Fire’ testing, ending with a final look at the European guidance and the European fire testing.
Module 2: The Systems Module
This comprehensive and practical module (delivered in the afternoon) provides the reasoning, knowledge and critical understanding of fire resisting timber doorsets. This also contains a maintenance checklist for those also interested in an inspection of timber fire doors under the (RRO). Other passive fire protection systems are then briefly examined including the following: Compartmentation – partition walls, floors and ceilings glazed screens, Wall and ceiling linings, The building envelope, Service risers and shafts, Penetration sealing systems, Cavity barriers, Fire rated ducts and dampers, Fire rated steel doors plus rolling shutters and fire curtains, Protection to structural steel (board, intumescent and spray).
What will you take away ?
✓ A thorough understanding of the regulations and standards applying to passive fire protection
✓ A clear appreciation of what good fire protection in buildings is
✓ A clear understanding of the inspection procedure and pass/fail criteria
✓ An understanding of the need for correct installation and the consequences of poor installation
✓ Guidance on current regulations and approved documents
✓ An introduction to the Fire Risk Assessment process
✓ An understanding of terminology and of fire testing
✓ An understanding of third party certification of products and installers and CE marking
There will be a short assessment to complete at the end of the course. This will be solely based upon the content delivered through-out the day.
You will not be expected to bring any tools, or written material to the training venue. All stationery and course material will be provided by your tutor.
Help and support from your tutor will be available throughout the day to answer questions on the course subject, along with any follow-up questions.
Food & Refreshments
Hot beverages (coffee and tea) and snacks will be available during the day and a light lunch will also be provided for all course delegates.
Colin Keeley, BSc (Hons), CIEH
Colin is a Senior Fire Engineer and Training Manager at IFC, heading teams of site inspectors in site investigation projects and also providing passive fire protection training for companies and individuals involved in such work.
Colin joined the company in 2014, following nearly 20 years at Exova Warrington Fire, as well as a further four years prior to that in a fire testing laboratory and 6 years in the plasterboard industry.
Suitability to the Role
Colin has for many years undertaken inspection and investigation with respect to new and existing passive fire protection installations such as compartmentation, fire doors, penetration seals, structural steel protection, glazed screens, etc.
As part of a typical inspection contract, Colin understands construction drawings; has an awareness of health & safety in buildings and on construction sites; is able to organize and manage time during the inspection and is capable of the preparation of detailed reports – some of which have been prepared as expert witness reports for court cases.
Relevance of Experience
Colin started in the fire industry undertaking laboratory testing in 1987. Soon after, Colin was the Fire Test Manager at the R & D laboratory of Lafarge Plasterboard Ltd for 6 years, which also included site investigation work. Much laboratory knowledge, report and assessment writing was gained under Warrington Fire. A shift to the Certification division initially involved product and installer certification, leading to site inspection and training.
Colin has been involved with the inspection of many different types of buildings, as well as presenting the passive fire training to many different people and companies. Inspection work has been undertaken for major clients such as DCLG, BAA, Dubai Civil Defence, BNFL, NHS, Sainsbury’s, Canary Wharf and many others.